Most laptop users panic when the laptop is not working properly, so in a hurry take it to service center, when the corrupted software may be one cause. There’s good we first analyze the problem starting from the most minor problems. If the laptop is still able to load into the bios setup. Iit is probable that the problem only on software alone.
Often the damage to the notebook / laptop protect error occurs because the hardware (system protection) which was designed by the hardware manufacture to protect against damage hardwre ………. (example: intel chipset at temperatures above 60′celcius will decide the current / turn itself off to avoid over heating) ……………..
Before concluding damage to hardware on the notebook / laptop, it would be nice to do a standard analysis of the damage.
Some of the symptoms that arise when the notebook to protect itself from over-heating:
SYMPTOMS 1. Lead power on, the screen does not appear
- Refrigerate while notebook
- Battrery unplug, turn on the ac adapter
- Open the cover (bottom of the laptop) memory slot. Remove the memory and then move it to another slot (if there are two memory slots) … for some type of laptop that only has one memory slot, remove the memory and put it back.
- Open the cover of a hard disk, remove the hard disk and try to turn back.
- Most notebooks, the processor can be viewed only by opening the bottom cover, can also try to step 5. Put back and try to turn back.
If the five stages mentioned above are, but the notebook is still not back to normal, then we can conclude there is a problem with your notebook hardware.
Damage lightest of the above symptoms is damage to the memory / sodim. You simply replace with a new memory.
There are several possible damage caused by the symptoms mentioned above:
1. Processor or power support (APPN)
2. VGA chip (APPN)
3. Motherboard chip (APPN)
4. Bios chip (ic epromer)
SYMPTOMS 2. There is no lead (indicator lamp) is not lit at all.
These symptoms arise from the absence of voltage (electric current) that enter or voltage interruption caused by damage to the component power …….. before concluding the damage to power components you should make a lightweight analysis that you can do yourself.
- Replace Adapter / Cable with a similar power to ensure the damage occurred on the adapter / cable or on your laptop.
- Remove the Battery to ensure no disruption occurred due to damage to your laptop battery.
- Note the lead (indacator lamp) on the adapter is lit or blinking normal (drop )…. If this happens, it’s certainly a problem occurs on your laptop ic power component. Should immediately contact the nearest service center …….
Related posts:
